| SPECIFICATIONS | SATO SG112-ex |
| Printing Method | Direct Thermal, Thermal Transfer |
| Print Resolution, dots/mm (dpi) | 12 dots/mm (305 dpi) |
| Print Mode | Standard Model | Continuous, Tear-off |
| | Cutter Model | Continuous, Tear-off, Cutter, Cut & Print |
| | Width / Length, mm (inch) | 266.7mm (10.5") / 420mm (16.5") |
| Media Alignment | Centered |
| Print Speed | 75, 100, 125, 150 mm/sec (3, 4, 5, 6 ips) Default: 100 mm/sec (4 ips) |
| CONSUMABLES SPECIFICATION (Recommended to use printer supplies manufactured or certified by SATO) |
| Media Sensor Type | I-Mark Sensor (Reflective) / Label Gap Sensor (Transmissive) |
Media Thickness
(Label + Liner) | 80 - 270μm (0.08 - 0.27mm)
*Use media 120μm (0.12mm) or greater in thickness for Auto Feed mode
*Use media 210μm (0.21mm) or lesser in thickness for Cutter option |
| Media Type | Roll or fan-fold die cut labels |
| Roll Shape | Diameter maximum 200mm (8") on 76mm (3") internal core |
| Label Wind Direction | Face-in / Face-out |
| Label Size | Continuous | Width | 128 - 297mm (including liner 131 - 300mm) / 5.0" - 11.7" (including liner 5.2" - 11.8") |
| Length | 30 - 420mm (including liner 33 - 423mm) / 1.2" - 16.5" (including liner 1.2" -16.6") |
| Tear-Of | Width | 128 - 297mm (including liner 131 - 300mm) / 5.0" - 11.7" (including liner 5.2" - 11.8") |
| Length | 40 - 420mm (including liner 43 - 423mm) / 1.6" - 16.5" (including liner 1.7" - 16.7") |
| Cutter | Width | 128 - 297mm (including liner 131 - 300mm) / 5.0" - 11.7" (including liner 5.2" - 11.8") |
| Length | 40 - 117mm (including liner 43 - 120mm) / 1.6" - 4.6" (including liner 1.7" - 4.7") |
| Dispenser | Width | 128 - 297mm (including liner 131 - 300mm) / 5.0" - 11.7" (including liner 5.2" - 11.8") |
| Length | 40 - 420mm (including liner 43 - 423mm) / 1.6" - 16.5" (including liner 1.7" - 16.7") |
| Ribbon | Width | 145 - 273mm (5.7" - 10.7") |
| Length / Diameter | 300m (984.25ft.) maximum / Ø 70.0mm maximum |
| Core Diameter | Inside Diameter : Ø 25.6mm |
| Wind Direction | Face-in |
| SYMBOLOGIES |
| Linear Barcode | UPC-A, UPC-E, JAN/EAN, CODE 39, CODE 93, CODE 128, GS1-128(UCC/EAN128), ISBT128, CODABAR(NW-7), ITF, Industrial 2of5,
Matrix 2of5, MSI, POSTNET, BOOKLAND, GS1 DataBar Omnidirectional, GS1 DataBar Truncated, GS1 DataBar Stacked, GS1
DataBar Stacked Omnidirectional, GS1 DataBar Limited, GS1 DataBar Expanded, GS1 DataBar Expanded Stacked, Intelligent Mail
Barcode (IMb). *GS1 DataBar was formerly called RSS |
| 2D Barcode | QR Code (including Micro QR), PDF417 (including MicroPDF), MAXICode (Ver.3.0), GS1 DataMatrix (ECC200 Ver.2.0) |
| COMMUNICATION INTERFACES |
Interface
| USB (Type A & B) 2.0 High Speed *Type A implemented in front of printer |
| LAN 10BASE-T/100BASE-TX auto-switching Protocol TCP/IP: LPR, FTP, TELNET, SNMP, SNTP, IPv4 / IPv6 |
| RS-232C DSUB 9 pi |
| IEEE1284 Amphenol 36 pin |
| EXT Amphenol 14 pin dedicated connector |
| SD Card Slot 1 slot |
| CPU Type | 32bit RISC-CPU 250MHz |
| LCD Specifi cations | Graphic LCD (Horizontal 128 dots x Vertical 64 dots) with backlight (White/Orange switchable),
Displayed languages: English, Simplifi ed Chinese, Japanese |
| LED Specifications | POWER (Green / Orange), ONLINE (Green), STATUS (Green / Red), LABEL (Red), RIBBON (Red) |
