SPECIFICATIONS |
Print Method |
Dye Sublimation / Resin thermal transfer |
Resolution |
300 dpi (11.8 dots/mm) continuous tone |
Colors |
Up to 16.7 million / 256 shades per pixel |
|
Wide array of ECO-friendly, high-capacity print ribbons from K to YMCKOKO. Laminate patch options from full card coverage and half panel polyester overlaminates to off-the-shelf and fully custom holographic overlaminates are all available from HID. Available print ribbons include:
- Full-color with resin black and overlay panel, YMCKO*, 500 prints
- Full-color with two resin black panels and overlay panel, YMCKOK*, 500 prints
- Full-color with two resin black panels, YMCKK*, 500 prints
- Full-color half-panel with resin black and overlay panel, YMCKO*, 850 prints
- Full-color half-panel with two resin black panels and overlay panel, YMCKOK*, 650 prints
- Full-color half-panel with two resin black panels and overlay panels, YMCKOKO*, 500 prints
- Resin black, K*, 3000 prints
|
Print Speed** |
6 seconds per card (K*); 16 seconds per card (YMCKO*); 24 seconds per card (YMCKOK*) |
Accepted Standard Card Sizes |
CR-80 (3.375˝L x 2.125˝W / 85.6 mm L x 54 mm W); CR-79 (3.313" L x 2.063" W / 84.1 mm L x 52.4 mm W) |
Print Area |
CR-80 edge-to-edge (3.36˝L x 2.11˝W / 85.3 mm L x 53.7 mm W); CR-79 (3.3" L x 2.04" W / 83.8 mm L x 51.8 mm W) |
Accepted Card Thickness |
.009˝ - .040˝ / 9 mil - 40 mil / .229 mm - 1.016 mm |
Accepted Card Types |
PVC or polyester cards with polished PVC finish; monochrome resin required for 100% polyester cards; optical memory cards with PVC finish; rewrite |
Input Hopper Card Capacity |
100 cards (.030˝ / .762 mm) |
Output Hopper Card Capacity |
Up to 100 cards. (.030" / .762 mm) |
Card Cleaning |
Card cleaning roller integrated into ribbon cartridge; cleaning roller is automatically replaced with each ribbon change |
Memory |
32 MB RAM |
Software Drivers |
Windows® 7, 8, 8.1 and 10 (32 bit & 64 bit) / Windows Server 2003, 2008, 2012 |
Interface |
USB 2.0, Standard Ethernet with internal print server (Note: Ethernet optional on BIS-Certified Units) |
Operating Temperature |
65° to 80° F / 18° to 27° C |
Humidity |
20–80% non-condensing |
Dimensions |
Printer: 9.8" H x 18.7" W x 9.2" D / 249 mm H x 475 mm W x 234 mm D Printer + lam: 18.9" H x 18.7" W x 9.2" D / 480 mm H x 475 mm W x 234 mm D |
Weight |
Printer: 11 lbs / 5 Kg Printer + lam: 20 lbs / 9.1 Kg |
Agency Listings |
Safety: UL 60950-2, CSA C22.2 (60950-07), and CE; EMC: FCC Class A, CE (EN 55022 Class A, EN 55024), CCC, BSMI, KC |
Supply Voltage |
100-240Vac, 50-60Hz, 1.6 Amps max |
Supply Frequency |
50 Hz / 60 Hz |
Environmental Features |
GreenCircle® Certified card printer (base models only without encoders), refillable supply cartridges (ECO), and rewrite technology - no ribbon required |
Warranty |
Printer – three years; printhead – three years, unlimited pass with UltraCard® |
Encoding Options (HID Encoders) |
Supported smart card and magnetic stripe technologies: 125 kHz (HID Prox) reader; 13.56 MHz (iCLASS® Standard / SE / SR / Seos®, MIFARE Classic®, MIFARE Plus®, MIFARE DESFire®, MIFARE DESFire® EV1, ISO 14443 A/B, ISO 15693) read/write encoder; contact smart card encoder reads from and writes to all ISO7816 1/2/3/4 memory and microprocessor smart cards (T=0, T=1) as well as synchronous cards; ISO magnetic stripe encoding, dual high- and low-coercivity, tracks 1, 2 and 3 |
Options |
Single wire Ethernet and USB 2.0 interface for inline printing and encoding are only optional on BIS-Certified Units (note: single wire Ethernet encoding is only available for iCLASS® , MIFARE®, and contact smart card encoding) - Ethernet-enabled printer supports wireless accessory; dual-sided printing module; smart card encoding modules (contact/contactless); magnetic stripe encoding module; printer cleaning kit; secure proprietary consumables system |
Software |
Swift ID™ embedded badging application, FARGO Workbench™ diagnostic utility with Color Assist™ spot-color matching |
Display |
Color changing status buttons |