Label printer	EOS2		EOS5		EOS2 mobile	EOS5 mobile
Material feed	centered
Printing method: Thermal transfer
Printing method: Thermal direct
Printable resolution dpi	203	300	203	300	300	300
Print speed up to mm/s	150	150	150	150	150	150
Print width up to mm	108	105.7	108	105.7	105.7	105.7
Start of printing Distance to locating edge mm	centered
Material
Paper, cardboard, plastics PET, PE, PP, PI, PVC, PU, acrylate, Tyvec
Shrink tubes ready-for-use					-	-
Shrink tubes continuous, pressed					-	-
Textile tapes
Packing on rolls, reels
Packing Fanfold					-	-
Packing Roll diameter up to mm	152		203		152	203
Packing Core diameter mm	38.1 - 76
Packing Winding	outside or inside
Labels Width single-lane mm	10 - 116
Labels Width multi-lane mm	5 - 116
Labels Height excl. label backfeed from mm	5
LabelsHeight incl. label backfeed from mm	12
Labels Thickness mm	0.05 - 0.6
Liner material Width mm	25 - 120
Liner material Thickness mm	0.05 - 0.16
Continuous material Width mm	5 - 120
Continuous material Thickness mm	0.05 - 0.5
Continuous material Weight (cardboard) up to g/m²	180
Shrink tubes Width ready-for-use up to mm	120
Shrink tubes Width continuous, pressed mm	5 - 85
Shrink tubes Thickness up to mm	1.1
Ribbon²⁾ Ink side	outside or inside
Ribbon Roll diameter up to mm	72
Ribbon Core diameter mm	25.4
Ribbon Variable length bup to m	360
Ribbon Width mm	25 –114
Printer sizes and weights
Width x Height x Depth mm	253 x 191 x 322		264 x 247 x 412		253 x 191 x 322	264 x 247 x 412
Weight kg	4		5		4	5
Label sensor with position indication
Gap sensor for	labels or punch marks and end of material, print marks on transparant materials
Reflective sensor from below or top for	labels and end of material, print marks on non-transparent materials
Distance from center to locating edge centered mm	0 - 58
Material passage up to mm	4
Electronics
Processor 32 bit clock rate MHz	800
Main storage (RAM) MB	256
Data storage (IFFS) MB	50
Slot for SD memory card (SDHC, SDXC) up to GB	512
Battery for time and date, real-time clock
Data memory when power is turned off (e.g. serial numbers)
Interfaces
RS232C 1,200 to 230,400 baud/8 bit
USB 2.0 Hi-speed device to connect a PC
Ethernet 10/100 Mbit/s	LPD, RawIP printing, SOAP webservice, OPC UA, WebDAV, DHCP, HTTP/HTTPS, FTP/FTPS, TIME, NTP, Zeroconf, SNMP, SMTP, VNC
1 x USB host on the operation panel for	Service Key or USB memory stick
2 x USB host on the back side for	Service Key, USB memory stick, keyboard, barcode scanner, USB Bluetooth adapter, USB WLAN stick, external operation panel
USB WLAN stick 2.4 GHz 802.11b/g/n
USB WLAN stick 2.4 GHz 802.11b/g/n + 5 GHz 802.11a/n/ac, Hotspot or Infrastructure Mode
USB Bluetooth adapter
Periphery connection USB host, 24 VDC
Operating data
Power supply	100 – 240 VAC, 50/60 Hz, PFC				24 VDC
Leistungsaufnahme	Standby 1,8 W / typical 45 W
Temperature / humidity Operation	+5 - 40°C / 10 - 85 %, not condensing
Temperature / humidity Storage	0-60°C / 20 - 85 %, not condensing
Temperature / humidity Transport	–25 - 60°C / 20 - 85 %, not condensing
Approvals	CE, FCC Class A, ICES-3, cULus, CB, CoC Mexico, CCC, EAC, BIS, BSMI, KC-Mark, RCM